It is the most commonly used heat pipe.
It is mainly used for house heating, bed heating, etc. The diameter is 15.88Φ and the length can be arbitrarily produced, but the efficiency is less than 2m.

In order to increase the efficiency of heat dissipation, the fins are pulled out of the heat pipe to expand the volume of the surface in contact with the air and adhered integrally with the heat pipe to facilitate heat transfer, thus doubling efficiency. Used in hot air fans, facility heating, drying rooms, mattress heating systems, cooling systems, etc. The pipe diameter is 15.88Φ ~ 25.4Φ The diameter of the radiating fin is 35-45Φ.

The outside is a heat pipe and the inside is a general pipe. Inside penetrates the center And sealing one side according to the application and injecting the liquid suitable for the application, It is also used as a heat pipe. It is used for cooling, but it can be used when it needs to be used regardless of heat storage heat pipe or horizontal.

In the LED, the nano releases heat to the outside, and when it cools down, it takes heat and sends it to the heat sink.

The bottom of the heat pipe located in the center of the heat sink required for LED cooling is the same as the LED module, and heat is collected.
The collected heat becomes a high-efficiency cooling device when the central heat pipe moves to the top and transfers it to the heat sink fins.

Increase the collecting area by operating the car. Can absorb more heat released from system efficiency

It has the advantage of being free to bend. It is not a metal hose.
When applied to mat products and used as a working fluid by dispersing germanium powder, it is possible to make a functional mat with far infrared rays or terahertz wave energy.

It is a flat plate with a thickness of 3mm left and right and is also used for cooling devices and heat dissipation. It is good for cooling LED or cpu, and it is excellent for heat dissipation of left and right foot baths.  The fin type flat plate heat pipe is used as a radiator.